[Home Page] [What's New] [List of Games] [MotorRaid]

!IMPORTANT!

PLEASE NOTE THIS IN YOUR MOTOR RAID MANUALS

V.R. SETTING PROCEDURE

In the INPUT TEST the following POT adjustments should be set as follows:

BANK (CENTER)	70H to 83H
THROTTLE (WHEN RELEASED)	under 30H
BRAKE (WHEN RELEASED)	under 30H

Once POTS are set within given ranges the VOLUME SETTING procedure must be performed.

Entering VOLUME SETTING in the TEST MODE causes the screen shown left to appear. (The values may differ from the screen shown.)

When setting the BANK, THROTTLE, and BRAKE you should actuate the full range of motion of travel ant then back to the original rest position, before saving.

When completed bring the arrow to the "EXIT WITH SAVE" line to ensure the values are recorded in memory, and exit TEST MODE.